Skip to main content

Filter By:

Rigid

$1,449.00
As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)
$2,349.00
Ice Cream Truck solves the problem of having to choose between a fat bike and a trail bike. It boasts a symmetric 190mm-spaced Chromoly frame, suspension-corrected 150mm-spaced fork, and sporty trail-oriented geometry. Supported by massive 4.8-inch tires, it's ready to deftly tackle nearly any terrain. - 100% Surly Chromoly steel with 44mm headtube and internal dropper post cable routing - Frame is E.D. Coated for increased life expectancy - 1-1/8-inch straight steerer fork, Chromoly steel - 100mm threaded bottom bracket shell - Front and rear thru-axles, non-offset
$1,849.00
The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset, and Surly's Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations. - 100% Surly Chromoly steel frame and fork; double-butted main triangle and 44mm headtube - The tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing. Works with 142, 148 12mm thru, as well as 135mm w/ 10/12 washer - Internal dropper seatpost routing with 30.9mm seat tube ID - Clearance for 29 x 2.55" or 27.5 x 3" tires
$1,849.00
The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset, and Surly's Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations. - 100% Surly Chromoly steel frame and fork; double-butted main triangle and 44mm headtube - The tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing. Works with 142, 148 12mm thru, as well as 135mm w/ 10/12 washer - Internal dropper seatpost routing with 30.9mm seat tube ID - Clearance for 29 x 2.55" or 27.5 x 3" tires
$1,849.00
As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high-volume, large-diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29 x 3" tires
$1,849.00
Breaking the Mold with a 29er Bike As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high volume, large diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. "Lean back, hang on, and ride that wild horse." -Thor - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29" x 3" tires
$1,499.00
Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. Your BMX Bike All Grown Up Lowside is like the grownup version of the bike you rode when you were a kid and still had hopes and dreams and some semblance of ambition. It's just as happy riding singletrack as it is parked outside your favorite drinking establishment. Lowside is a single speed mountain bike. Singlespeeding has been a part of Surly's DNA since day one when we launched the 1x1 Rat Ride. After a lot of Homie Fall Fests and more feats of strength than we can recall, we decided to discontinue it a couple years back. Lowside picks up right where the 1x1 left off. "Some have dubbed the Lowside the ultimate pub cruiser." - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Spec'd in alternating years with 26 x 3" or 27.5 x 2.8" tires, the Lowside remains capable of running either option
$4,120.00
The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6""or 27.5" x 2.8" tires.
$5,120.00
The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. DESIGNED FOR BIKEPACKING Every last feature of Fenrir Ti is optimized for bikepacking. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires. 
$3,990.00
Voytek changes the fat bike game. It is fast, lightweight, agile, and can handle even the sharpest turns of your local singletrack with ease. Think of it as a mountain bike that can fit fat tires with adjustable geometry. We paired a narrow pedal stance—aka Q factor—with aggressive XC race geometry to build a fat bike that can intuitively handle snowy trails like your mountain bike can handle summer singletrack without sacrificing ride quality. When the weather turns and the snow turns to dirt, swap out the 26" fat wheelset for a 29" MTB wheelset to keep the party going all year. THE Q-FACTOR IS THE KEY The Voytek has the narrowest Q-factor of any fat bike in the world at 183mm. With a narrow Q-factor, your weight is closer to the centerline of the bike. This is especially important when cornering because it allows for tight, responsive control—the wider Q-factor found on most fat bikes spreads out your pedals and creates a floppy, unstable feel. The Voytek frame was designed around an 83mm bottom bracket, where most fat bikes have a bottom bracket north of the 100-110mm range. With the Voytek, you don't need to compromise agile handling to ride up to 4.6" tires. ONE BIKE, THREE WHEELBASE LENGTHS Our Tuning Chip rear dropout is at the heart of the versatile Voytek. With a quick change in positions, the wheelbase of the Voytek can be extended or shortened by up to 20mm, which also changes bottom bracket height by up to 4mm and head tube angle by +/- 0.5º. In the forward position, you've got an aggressive, responsive Voytek for your next race. In the rear position, you've got that same intuitive handling but with added stability to make it easier to ride in deep snow or adverse terrain. In the middle, well, that's the best of both worlds. PLUS OR FAT? FAT OR PLUS? We're internally divided here as to whether the Voytek is a plus bike that can handle fat tires or if the Voytek is a fat bike that has the handling worthy of a plus bike. When the trails are packed with snow, we're riding 4" tires. When spring comes and the trails turn to dirt, we swap out tires and ride 29" plus until winter returns. The versatility of the Voytek blurs the lines of plus and fat, keeping the party going all year long. MODERN GEOMETRY Voytek's longer top tube, short chainstays—the shortest in the world for a fat bike—and slightly slacker head tube angle mean more speed and more fun. SUSPENSION CORRECT Voytek's suspension-corrected geometry is compatible with an Otso carbon rigid fork or up to 120 mm travel suspension fork. COMPETITOR TESTED, ISO APPROVED Voytek's patent-pending frame design exceeds all ISO frame safety standards and has been proven over thousands of miles of test riding, including the legendary Iditarod Invitational and Arrowhead 135 competitions. DROPPER COMPATIBLE The EPS molded carbon frame of the Voytek was designed to accept internally routed dropper seat posts.
Page 1 of 1