Cycling Gear & Accessories

The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride. Compatibility: Requires a star nut or compression plug with a M6x1 thread. Works with road and mountain shifters and brake levers. Compatible with most hanger alignment tools on the market. Recommendations: It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.

This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses. Compatible with all SRAM dub cranks, road/mountain/gravel.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place. Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm. Features: - The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil. - Attach at the rear luggage carrier of conventional and electric bike frames. - The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE SL and DIVINE SL RASCAL

Service kit for 100 hour service (readjusting play and replacing wiper). Kit includes: - 1x Wiper - 6x Glide pin - 1x Lower bushing - 1x Foam ring - 1x C-clip - 1x Upper bushing

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12

BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts. The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear. - Suitable for all BikeYoke dropper posts - Size: 250ml (lasts for several full services)

Valve-extension-adapter. Allows easier access to your dropper valve for shock-pumps with short valve heads.

This BikeYoke allows the use of a standard shock in your Specialized bike. Stumpjumper 2016-2018 Turbo Levo 2016-2018 Includes: - 1x BikeYoke SJ02 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Squatch platform pedals have a low-profile, nylon construction and molded traction studs that are easier on the shin in the event of a crash or pedal slip. - EPB bearing system - Spindle size: 9/16-inch

- Perforated leather handlebar tape - Genuine perforated leather - Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips - Self Adhesive: Yes - Tape Length: 215mm

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

- Complete shifter and brake cables and housing kit - Low friction, prelubricated casing - Cable Material: Stainless Steel - Cables & Housing: Comp.Campagnolo Ergopower Ultra-Shift

- Complete, high quality bicycle reflector set - Includes 1x RR-165-BPR Rear reflector (red), 1 x RR-165-BP2W front reflector (white) and 2x RR-550N-WUW wheel reflectors (white) - Also includes brackets to mount on most seatposts and handlebars

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

- Folds to save space when not in use - Convenient & minimalist storage solution for single bike - Adjustable seatpost grabber pivots & expands to accommodate any style bicycle - Durable steel construction finished in silver powdercoat - Dimensions Approx: 12" x 1" x 1" (305 x 25 x 25 mm) - Helps eliminate wall scuffs and dings - Safely holds your bicycle upright next to a wall or post with both wheels firmly on the ground

Modern & clean bike storage Storage for almost any bike. Modern design looks good in any room. Features - Secure: Holds one bike up to 2.5/3.5" (regular/fat tire) by rim - Options: Tire tray secures rear wheel & protects wall - Versatile: Elegant design looks good in any room or garage - Sizes: Regular or fat tire - Construction: Durable powdercoated steel & custom molded cover - Max Weight: 40 lb / 18 kg - Dimensions: 11" x 3.5" x 5" / 280 x 84 x 131 mm

- Grade 10 chromium steel balls

- Integrated lower headset for 1.5" or tapered steerers - 36° x 45°

- Made with USDA-certified organic ingredients - Natural honey sandwiched between 2 thin waffles - Allergens: contains wheat & soy, may contain traces of eggs

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

- Ideal fit for very short stems with steep upward stem angles - 1cm rise in the base will allow larger cycling computers like the Garmin 1030 to nest securely above the stem without interference

- Direct mounting for an aero cockpit - Strongest platform for your cycling computer and light or camera - Compatible: Future, Venge, Tarmac stems - Fits all Garmin computers including Garmin 1040 - CNC machined 6016-T6 aluminum - Weight: 41g - One bolt Specialized SL& stem face plate mounting system - Includes mounting bolt and TNut - Lifetime Warranty - Made in Boise, Idaho USA

- CNC Machined Aluminum - Combo Compatible (K13-580 adapter sold separately) - GARMIN approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight- 47g Compatibility: - GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo compatible (GoPro-style light/camera interface) K13-580-BLK adapter sold separately